Powerbuilt 648796 Honda Crankcase Pulley Removal Tool
Powerbuilt 648796 Honda Crankcase Pulley Removal Tool
Powerbuilt 648796 Honda Crankcase Pulley Removal Tool Reviews
If you like to do your own semi-major engine work, do not hesitate to buy one of these in advance. Removing the crank pulley bolt without one is an excersize in frustration and risky hacks. I tried it, and was quite frustrated. So I bought this tool. $25 later, and the bolt is off with very little effort. You will need this tool, a 19mm socket (for the pulley bolt), an extension for the socket, and two decently long breaker bars. A long-handled socket wrench, or a socket wrench with a cheater pipe will work fine, too. The wrench/breaker bar you use on this tool has to be 1/2″ drive.
Definitely 100% worth it.
Strangely, the tool I received was not an Alltrade, but a Powerbuilt.
Used on a 1998 Civic (1996-2000 should be the same) after my 650ftlbs impact gun wouldn’t budge it. This is a must have tool for the job. There are a few different sizes, so measure before buying. Just measure on the inside of the hexagon from side to side. This is the 50mm tool. Oh, don’t forget to have two breaker bars available, one to hold the inner nut and one you put on this.
Leave a Reply